Toyota Camry Manual page 955

CL–22
1MZ–FE Engine:
5S–FE Engine:
CLUTCH – CLUTCH UNIT
3. APPLY MOLYBDENUM DISULPHIDE LITHIUM BASE
GREASE (NLGI NO.2)
(a) Apply release hub grease to these parts:
z
Release fork and hub contact point
z
Release fork and push rod contact point
z
Release fork pivot point
(b) Apply clutch spline grease:
z
Clutch disc spline
HINT:
Recommended grease part number 08887–01706 (100 g).
4. INSTALL RELEASE BEARING AND FORK TO TRANS-
AXLE
Install the bearing to the release fork, and then install them to
the transaxle.
5. INSTALL TRANSAXLE TO ENGINE
(See page E153 MX–9, S51 MX–8)
Q10091
Author : Date :
1801