Toyota Camry Manual page 861

BR–32
SST
SST
BRAKE – REAR DRUM BRAKE
REMOVAL
1. INSPECT SHOE LINING THICKNESS
Remove the inspection hole plug, and check the shoe lining
thickness through the hole.
If less than the minimum, replace the shoes.
Minimum thickness: 1.0 mm (0.039 in.)
2. REMOVE REAR WHEEL
BR1532
3. REMOVE BRAKE DRUM
(a) Release the parking brake lever and remove the brake
drum.
HINT:
If the brake drum cannot be removed easily, do the following
steps.
(b) Insert a bent wire or equivalent through the hole in the
brake drum, and hold the automatic adjusting lever away
from the adjuster.
R00285
(c) Using a screwdriver, reduce the brake shoe adjustment
by turning the adjuster.
4. REMOVE FRONT SHOE
(a) Using SST, disconnect the return spring.
SST 09703–30010
BR1534
(b) Using SST, remove the shoe hold–down spring, 2 cups
and pin.
SST 09718–00010
(c) Disconnect the anchor spring from the front shoe and re-
move the front shoe.
(d) Remove the anchor spring from the rear shoe.
BR1535
Author : Date :
BR0AX–03
2055