Toyota Camry Manual page 923

CH–6
Pivot Bolt
Adjusting
Lock Bolt
CHARGING (1MZ–FE)
REMOVAL
1.
Loosen the pivot bolt, adjusting lock bolt, and adjusting bolt,
and remove the drive belt.
Adjusting Bolt
P14226
2.
(a)
(b)
(c)
(d)
P14227
– GENERATOR
REMOVE DRIVE BELT
Torque:
Pivot bolt: 56 N·m (570 kgf·cm, 41 ft·lbf)
Lock bolt: 18 N·m (180 kgf·cm, 13 ft·lbf)
REMOVE GENERATOR
Disconnect the generator connector.
Remove the nut, and disconnect the generator wire.
Disconnect the wire harness from the clip.
Remove the pivot bolt, plate washer, adjusting lock bolt
and generator.
Author :
CH01F–01
Date :
1769