Toyota Camry Manual page 748

USA (mph)
Standard indication
20
40
60
80
100
120
3
2
BODY ELECTRICAL
INSPECTION
1. INSPECT SPEEDOMETER ON–VEHICLE
Using a speedometer tester, inspect the speedometer for allow-
able indication error and check the operation of the odometer.
HINT:
Tire wear and tire over or under inflation will increase the indica-
tion error.
If error is excessive, replace the speedometer.
Allowable range Standard indication
98 – 110
118 – 132
2. INSPECT VEHICLE SPEED SENSOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and negative (–) lead to terminal 2.
(b) Connect the positive (+) lead from the tester to terminal
1
3 and the negative (–) lead to terminal 2.
(c) Rotate the shaft.
(d) Check that there is voltage change from approx. 0 V to
11 V or more between terminals 2 and 3.
HINT:
N02332
The voltage change should be performed 4 times for every rev-
olution of the speed sensor shaft.
If operation is not as specified, replace the sensor.
3. INSPECT TACHOMETER ON–VEHICLE
(a) Connect a tune–up test tachometer, and start the engine.
NOTICE:
D
Reversing the connection of the tachometer will dam-
age the transistors and diodes inside.
D
When removing or installing the tachometer, be care-
ful not to drop or subject it to heavy shocks.
– COMBINATION METER
CANADA (km/h)
18 – 24 20
38 – 44 40
56 – 66 60
78 – 88 80
100
120
140
160
Author :
BE–47
BE0AK–03
Allowable range
17 – 24
38 – 46
57.5 – 67
77 – 88
96 – 109
115 – 130
134 – 151.5
153 – 173
Date :
2267