Toyota Camry Manual page 875

BR–46
BRAKE – PARKING BRAKE
DISASSEMBLY
1. REMOVE REAR WHEEL
Torque: 103 N·m (1.050 kgf·cm, 76 ft·lbf)
2. REMOVE REAR DISC BRAKE ASSEMBLY
(a) Remove the 2 mounting bolts and remove the disc brake
assembly.
Torque: 47 N·m (475 kgf·cm, 34 ft·lbf)
(b) Suspend the disc brake securely. Ensure that the hose is
not stretched.
W03265
3. REMOVE DISC
Release the parking brake lever and remove the disc.
HINT:
If the disc cannot be removed easily, turn the shoe adjuster until
the wheel turns freely.
R00309
4. REMOVE SHOE RETURN SPRINGS
Using needle–nose pliers, remove the shoe return springs.
5. REMOVE FRONT SHOE ADJUSTER AND TENSION
SPRING
(a) Slide out the front shoe and remove the shoe adjuster.
(b) Remove the shoe strut with the spring.
(c) Remove the shoe hold–down spring cups, spring and pin.
(d) Disconnect the tension spring and remove the front shoe.
BR3948
6. REMOVE REAR SHOE
(a) Slide out the rear shoe.
(b) Remove the tension spring from the rear shoe.
(c) Remove the shoe hold–down spring cups, spring and pin.
(d) Using needle–nose pliers, disconnect the parking brake
cable from the parking brake shoe lever.
R00310
Author : Date :
BR0B9–03
2069