Toyota Camry Manual page 528

AUTOMATIC TRANSAXLE
17. INSTALL PARK/NEUTRAL POSITION SWITCH
(a) Install the park/neutral position switch to the manual valve
shaft.
(b) Place the new locking plate and tighten the nut.
(c) Stake the nut with locking plate.
(d) Install the 2 bolts.
(e) Adjust the park/neutral position switch.
HINT: Align the groove and neutral basic line.
(f) Tighten the 2 bolts.
18. INSTALL UNION AND ELBOW
(a) Install the new O–rings to the union and elbow.
(b) Install the union elbow to the transaxle case.
Torque: 27 N·m (275 kgf·cm, 20 ft·lbf)
HINT: Install the elbow, as shown in the illustration.
19. INSTALL MANUAL SHAFT LEVER
– COMPONENT PARTS INSTALLATION
AX–125