Toyota Camry Manual page 264

AX–24
AUTOMATIC TRANSAXLE
44. CHECK OPERATION OF FIRST AND REVERSE
BRAKE PISTON
Apply compressed air into the case passage and confirm
that the piston moves.
If the piston does not move, disassemble and inspect.
45. REMOVE SNAP RING HOLDING FLANGE TO CASE
46. REMOVE FLANGES, PLATES AND DISCS
47. TURN TRANSAXLE CASE AROUND
48. REMOVE 11 BOLTS HOLDING OVERDRIVE UNIT TO
TRANSAXLE CASE
49. REMOVE OVERDRIVE UNIT WITH ALL PARTS
(a) Tap on the overdrive case circumference with a plastic
hammer to remove the unit from the transaxle case.
(b) Remove the overdrive planetary gear and counter gear if
they remained in the transaxle.
HINT: The overdrive unit is heavy, so be careful not to
drop it.
– COMPONENT PARTS REMOVAL