BE–58
Repair Point
Masking Tape
BODY ELECTRICAL
–
7.
IF NECESSARY, REPAIR DEFOGGER WIRE
(a)
Clean the broken wire tips with grease, wax and silicone
remover.
(b)
Place the masking tape along both sides of the wire to be
repaired.
Broken
(c)
Thoroughly mix the repair agent (Dupont paste No.
Wire
4817).
BE0150
(d)
Thoroughly mix the repair agent (Dupont paste No. 4817
or equivalent).
(e)
Using a fine tip brush, apply a small amount to the wire.
(f)
After a few minutes, remove the masking tape.
(g)
Do not repair the defogger wire for at least 24 hours.
BE0151
DEFOGGER SYSTEM
Author :
Date :
2278