Toyota Camry Manual page 216

Fresh
Clamp
Cool
Clamp
AIR CONDITIONING – AIR CONDITIONING CONTROL ASSEMBLY
INSTALLATION
Installation is in the reverse order of removal
(See page AC–82).
1. AFTER INSTALLATION INSPECT A/C CONTROL LE-
VER AND DIAL OPERATION
Move the control dial and lever left and right and check fro stiff-
ness and binding through the full range of the lever and dial.
If there is stiffness or binding, proceed next step.
2. ADJUST A/C CONTROL CABLES
(a) Set A/C control assembly in these conditions:
(1) Air inlet control lever in "FRESH" position
(2) Temperature control dial in "MAX. COOL" position.
(b) Adjust air inlet control cable.
(1) Pull out the inner of air inlet cable and hit the link of
blower unit on the link stopper.
(2) Set the cable connector to lever pin and clamp the
cable outer.
N21047
(c) Adjust air mix control cable.
Set the cable connector to air mix link pin on left side of
A/C unit and clamp the cable outer on.
N20239
Author : Date :
AC–87
AC0NI–02
2569