Toyota Camry Manual page 698

SST
SST
SST
SST
BODY
2. DEPLOYMENT WHEN DISPOSING OF FRONT SEAT
OUTER BELT ONLY
NOTICE:
z
When disposing of the front seat outer belt (with seat
belt pretensioner) only, never use the customer's ve-
hicle to deploy the seat belt pretensioner.
z
Be sure to following the procedure given below when
deploying the seat belt pretensioner.
HINT:
Have a battery ready as the power source when deploying the
seat belt pretensioner.
(a) Remove the front seat outer belt
(See page BO–123)
HINT:
Cut the belt near the seat belt retractor.
(b) Check functioning of SST.
(See step 1–(a))
SST
Battery
AB0158
(c) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H01880
(2)
NOTICE:
Place the front seat outer belt shown in the illustration.
(3)
NOTICE:
Take care not to damage the SST wire harness.
SST
H01881
– SEAT BELT PRETENSIONER
09082–00700, 09082–00740
Connect the 2 SST, then connect them to the seat
belt pretensioner.
09082–00700, 09082–00740
Locate the front seat outer belt on the ground and
cover it by the disc wheel with tire.
Move the SST to as least 10 m (33 ft) from the disc
wheel.
Author :
BO–131
Date :
2479