Toyota Camry Manual page 258

AX–18
AUTOMATIC TRANSAXLE
17. REMOVE ACCUMULATOR PISTON AND SPRINGS
(a) Loosen the 5 bolts one turn at a time until the spring ten-
sion is released.
(b) Remove the cover and gasket.
(c) Remove the piston and spring for C
(d) Remove the O–rings.
(e) Pop out piston C
pressed air 98 kPa (1 kgf/cm
(f) Remove the 2 O–rings from the B
18. MEASURE PISTON STROKE OF SECOND COAST
BRAKE
(a) Apply a small amount of paint to the piston rod at the point
it meets the case.
(b) Using SST, measure the piston stroke while applying and
releasing compressed air (392 – 785 kPa, 4 – 8 kgf/cm
57 – 114 psi).
SST 09240–00020
Piston stroke:
If the piston stroke exceeds the limit, replace the piston
rod or brake band.
– COMPONENT PARTS REMOVAL
into a rag, using low–pressure com-
1
1.5 – 3.0 mm (0.059 – 0.118 in.)
and C .
1 2
2
, 14 psi).
piston.
2
2
,