Toyota Camry Manual page 940

CL0528
Protrusion
1.5 – 3.5 mm
(0.059 – 0.138 in.)
Q10081
CLUTCH – CLUTCH MASTER CYLINDER
REASSEMBLY
1. COAT PARTS WITH LITHIUM SOAP BASE GLYCOL
GREASE, AS SHOWN
2. INSERT PISTON INTO CYLINDER
3. INSTALL PUSH ROD ASSEMBLY WITH SNAP RING
4. INSTALL RESERVOIR TANK
(a) Install the reservoir tank and a new grommet.
(b) Using a pin punch and hammer, drive in the slotted spring
pin.
Author :
CL–7
CL039–01
Date :
1786