Toyota Camry Manual page 954

1MZ–FE:
SST
Flywheel
Side
5S–FE:
SST
SST
5
3
6
4
Matchmarks
2
CLUTCH
INSTALLATION
1.
(a)
(b)
Q10089
(c)
(d)
1
HINT:
Temporarily tighten the No.3 bolt.
Q10084
2.
SST
Using a dial indicator with roller instrument, check the dia-
phragm spring tip alignment.
If alignment is not as specified, using SST, adjust the dia-
phragm spring tip alignment.
Q10072
– CLUTCH UNIT
INSTALL CLUTCH DISC AND CLUTCH COVER ON
FLYWHEEL
1MZ–FE:
Insert SST in the clutch disc, and then set them.
SST 09301–00220
5S–FE:
Insert SST in the clutch disc, and then set them.
SST 09301–00210
Align the matchmarks on the clutch cover and flywheel.
Torque the bolts on the clutch cover in the order shown.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
CHECK DIAPHRAGM SPRING TIP ALIGNMENT
Maximum non–alignment: 0.5 mm (0.020 in.)
SST 09333–00013
Author :
CL–21
CL03M–02
Date :
1800