REMOVAL
1.
REMOVE COWL SIDE TRIM
2.
REMOVE FRONT DOOR INSIDE PLATE LH
3.
REMOVE NO. 2 LOWER COVER
4.
REMOVE GLOVE COMPARTMENT
5.
REMOVE ECM
(a)
Disconnect the connectors.
(b)
Remove the 2 nuts and ECM.
6.
DISCONNECT AIR INLET DAMPER CONTROL CABLE
HINT:
At the in time of installation, please refer to following item.
After connection, inspect the air inlet control lever operation.
(See page AC–87).
7.
REMOVE A/C AMPLIFIER.
(a)
Disconnect the connector.
(b)
Release the 2 claws and pull out the amplifier.
8.
REMOVE CONNECTOR BRACKET SET SCREWS
9.
REMOVE BLOWER UNIT
(a)
Disconnect the connector.
(b)
Disconnect the thermistor connector clamp.
(c)
Remove the 2 screws, bolt and nut, then remove the blower unit.
AIR CONDITIONING
–
BLOWER UNIT
Author :
Date :
AC–35
AC0M0–02
2517