Toyota Camry Manual page 451

AX–48
AUTOMATIC TRANSAXLE
2. INSTALL CLUTCH PISTON TO CLUTCH DRUM
(a) Install the 2 new O–rings to the piston.
(b) Coat the O–ring with ATF.
(c) Press the piston into the drum with the cup side up, being
careful not to damage the O–rings.
3. INSTALL PISTON RETURN SPRINGS
(a) Place the return spring and snap ring onto the piston.
(b) Place SST on the spring retainer, and compress the
springs with a press.
SST 09350–32014 (09351–32070)
(c) Install the snap ring with snap ring pliers.
Be sure the end gap of the snap ring is not aligned with
the spring retainer claw.
4. INSTALL PLATES, DISCS AND FLANGE
(a) Install the plates and discs.
Install in order:
P=Plate D=Disc
P–D–P–D–P–D–P–D–P–D
(b) Install the flange with the flat end facing downward.
5. INSTALL SNAP RING
Check that the end gap of snap ring is not aligned with one
of the cutouts.
– FORWARD CLUTCH