Toyota Camry Manual page 1079

DI–52
3 Check throttle position sensor (See page SF–29).
OK
4 Check voltage between terminals VTA and E2 of ECM connector.
ON
w/o Immobiliser
VTA
(+)
w/ Immobiliser
VTA
(+)
A03013
OK
Check and replace ECM (See page IN–31).
DIAGNOSTICS –
NG
PREPARATION:
(a) Remove the glove compartment (See page SF–64).
(b) Turn the ignition switch ON.
CHECK:
Measure voltage between terminals VTA and E2 of the ECM
connector.
OK:
E2
(–)
E2
(–)
NG
A03413
ENGINE (5S–FE)
Replace throttle position sensor.
Throttle valve
Fully closed
Fully open
Check for open and short in harness and con-
nector between ECM and throttle position sen-
sor (VTA or E2 line) (See page IN–31).
Author :
Voltage
0.3 ∼ 1.0 V
3.2 ∼ 4.9 V
Date :
287