Toyota Camry Manual page 696

SST
SST
SST
SST
BODY –
1. SEAT BELT PRETENSIONER DEPLOYMENT WHEN
SCRAPPING VEHICLE
HINT:
Battery
Have a battery ready as the power source to deploy the airbag.
AB0158
(a) Check functioning of SST
CAUTION:
When deploying the seat belt pretensioner, always use the
specified SST: SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the seat belt pretensioner.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(b) Install the SST.
(1)
H01580
(2)
(3)
(4)
SST
H01346
SEAT BELT PRETENSIONER
09082–00700, 09082–00740
Connect the SST to battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (–) terminal.
Check functioning of SST
Press the SST activation switch, and check the LED
of the SST activation switch lights up.
Remove the front door scuff plate.
Remove the center pillar lower garnish.
Disconnect the pretensioner connector as shown in
the illustration.
Buckle the front seat belt and check that there is no
looseness and slack in the front seat inner belt and
front seat outer belt.
09082–00700, 09082–00740
Author :
BO–129
Date :
2477