Configuring The Event Recorder - Satec Expertmeter EM720 Operation Manual

Chapter 5 Configuring the EM720

Configuring the Event Recorder

96
To configure the Event log file:
1. Double click on the Event Log file partition with the
left mouse button.
2. Select a desired file type for your file.
3. Select the maximum number of records you want to
be recorded in the file.
4. Click OK, then send your new setup to the meter or
save to the device database.
By default, the Event recorder stores all events related to
configuration changes, resets, and device diagnostics. In
addition, it can
operations. Each setpoint should be individually enabled
for recording to the Event log.
To log setpoint operations, add the "Event log" action to
the setpoint actions list. When a setpoint event happens,
the Event recorder logs all setpoint conditions that caused
the event and all setpoint actions performed in response
to the event. Logging actions themselves are not recorded
to the Event log.
EM720 Power Quality and Revenue Meter
Configuring Recorders
record events related to setpoint