Configuring The Event Recorder; Configuring The Data Recorder - Satec EM132 Installation And Operation Manual

‎ C hapter 5
Configuring the EM13X Series

Configuring the Event Recorder

Configuring the Data Recorder

Conventional Data Log Files
108
To configure the Event log file:
Double click on the Event Log file partition with the left mouse button.
Select a desired file type for your file.
Select the maximum number of records you want to be recorded in the
file.
Click OK, then send your new setup to the meter or save to the device
database.
By default, the Event recorder stores all events related to configuration
changes, resets, and device diagnostics.
The Data recorder is programmable for recording up to 9 data
parameters per record in each of the conventional data log files. The
list of parameters to be recorded to a data log is configurable
individually for each file.
To create a new data log file or re-configure an existing file:
Double click on the file partition with the left mouse button.
Select a partition type for your file.
Select the number of parameters you want to be recorded in the file
records.
Select the maximum number of records you want to be recorded in the
file.
EM13x Series SMART MULTIFUNCTION METER
Configuring Recorders