Device Options And Mode Control - Satec Expertmeter EM720 Operation Manual

Chapter 5 Configuring the EM720

Device Options and Mode Control

70
Using the Front Display
To enter the Options setup menu, select Options from the
main menu.
To enter the TEST mode setup, select Test from the main
menu. You can also use an extended press on the SCROLL
+ SELECT/ENTER buttons from the clock display as a
shortcut for immediate entering the TEST mode setup.
See Viewing and Changing Setup Options
information on navigating in menus.
See the table below for available options.
Using PAS
To enter the setup dialog, select the device site from the
list box on the PAS toolbar, select General Setup from the
Meter Setup menu, and then click on the Device Options
tab.
NOTE
Test Mode options and other device options have different
security levels. You may not be allowed to change the
device options if the user password you provided does not
have required permissions.
EM720 Power Quality and Revenue Meter
General Meter Setup
in Chapter 3 for