Clearing Device Diagnostics - Satec Expertmeter EM720 Operation Manual

Chapter 6 Device Control and Upgrading

Clearing Device Diagnostics

126
8. To synchronize the meter clock with the PC clock,
click Set.
You need not update the clock in your meter if the clock is
synchronized to the external GPS master clock.
Using the Front Display
See the following section
Files on how to clear the device diagnostics from the front
display.
Using PAS
Via PAS, you can both examine the present device
diagnostics status, and clear it.
To enter the Device Diagnostics dialog, check the On-line
button on the PAS toolbar, select Device Control from the
Monitor menu, and then click on the Device Diagnostics
tab.
To clear the device diagnostics events, click on Clear.
Refer to Device Diagnostic Codes
of diagnostic codes and their meanings.
You can also clear the device diagnostics via the Clear
Operation/Event Counters entry in the Reset dialog (see
the following section).
EM720 Power Quality and Revenue Meter
Clearing Device Diagnostics
Resetting Accumulators and Log
in Appendix G for the list