Display Setup - Satec Expertmeter EM720 Operation Manual

Chapter 5 Configuring the EM720 General Meter Setup

Display Setup

Using the Front Display
To enter the setup menu, select Display from the main
menu. See Viewing and Changing Setup Options in
Chapter 3 for information on navigating in menus.
See the table below for available display options.
Using PAS
To configure your display, select the device site from the
list box on the PAS toolbar, select General Setup from the
Meter Setup menu, and then click on the Display Setup
tab.
The available options are listed in the following table.
EM720 Power Quality and Revenue Meter 75