Configuring The Event Recorder; Configuring The Data Recorder - Satec PM135P Installation And Operation Manual

‎ C hapter 5 Configuring the PM135

Configuring the Event Recorder

Configuring the Data Recorder

Conventional Data Log Files
106
To configure the Event log file:
3. Double click on the Event Log file partition with the left mouse
button.
4. Select a desired file type for your file.
5. Select the maximum number of
records you want to be recorded in
the file.
6. Click OK, then send your new setup
to the meter or save to the device
database.
By default, the Event recorder stores all events related to configuration
changes, resets, and device diagnostics.
The Data recorder is programmable for recording up to 9 data parameters
per record in each of the conventional data log files. The list of
parameters to be recorded to a data log is configurable individually for
each file.
To create a new data log file or re-configure an existing file:
1. Double click on the file partition with
the left mouse button.
2. Select a partition type for your file.
3. Select the number of parameters
you want to be recorded in the file
records.
Configuring Recorders
PM135 Powermeter Series