Display Setup Menu - Satec C191HM Installation And Operation Manual

4.8 Display Setup Menu

SELECT CHG
This menu allows you to view and change display properties. Table 4-9 lists
available options with their code names and applicable ranges.
Table 4-9 Display Options (∗ default setting)
Display Code
UPdt
diSP
UPdt
0.5
ScrL
diSP
ScrL
5
rEtn
diSP
rEtn
diS
bAr
diSP
bAr
5000
Ph.P
diSP
Ph.P
diS
Fund
diSP
Fund
diS
Chapter 4 Setup Menus
ENTER
Parameter Options
Display update 0.1 - 10.0 s
time (0.5)*
Auto scroll nonE*
2-15 s
Auto return to diS*, En
the main screen
Nominal load 0-6,500A
current for LED (0*)
bar graph
Phase powers diS*, En
display mode
Fundamental diS*, En
values display
mode
diSP
ENTER
Description
Defines interval between
display updates
Disables/enables auto scroll
on common measurements
display (main screen) and
defines scroll interval
Disables/enables auto return
to the main screen after 30
seconds of uninterrupted use
Defines the nominal load
(100%) level for the bar
graph display
(0 = CT primary current)
Disables/enables display of
phase powers in common
measurements (main
screen)
Disables/enables display of
fundamental values in
common measurements
(main screen)
33