Viewing And Clearing Device Diagnostics; Viewing Communication Status And Statistics - Satec EM132 Installation And Operation Manual

‎ C hapter 6
Device Control and Upgrading

6.3 Viewing and Clearing Device Diagnostics

Using the Front Display
Using PAS
Figure ‎ 6 -4: Device Control Dialog Box – Device Diagnostics Tab

6.4 Viewing Communication Status and Statistics

118
See Diagnostics Display
diagnostics from the front display.
Ensure that the On-line button on the PAS toolbar is checked, select
Device Control from the Monitor menu, and then click on the Device
Diagnostics tab.
See Device Diagnostic Codes
codes and their meaning.
To clear the device diagnostics events, click on Clear.
Ensure that the On-line button on the PAS toolbar is checked, select
Device Control from the Monitor menu, and then click on the
Communications tab.
Viewing and Clearing Device Diagnostics
in Chapter 3 on how to view and clear device
in Appendix G for the list of diagnostic
EM13x Series SMART MULTIFUNCTION METER