Siemens SINAMICS S120 Function Manual page 48

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Extended setpoint channel

Jog properties

● If both jog signals are issued at the same time, the current speed is maintained (constant

● Jog setpoints are approached and exited via the ramp-function generator.

● The jog function can be activated from the "ready for switching on" status and from the

● If ON/OFF1 = "1" and jog are selected simultaneously, ON/OFF1 has priority.

● OFF2 and OFF3 have priority over jog.

● In "jog mode":

● The suppression bandwidths (p1091 ... p1094) and the minimum limit (p1080) in the

● The ramp-function generator cannot be frozen (via p1141) in jog mode (r0046.31 = 1).

Function chart: jog 1 and jog 2

speed phase).

OFF1 deceleration ramp.

– The main speed setpoints (r1078) and

– the additional setpoint 1 (p1155) are blocked.

– The additional setpoint 2 (p1160) is forwarded and added to the current speed.

setpoint channel are also active in jog mode.

Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5

Drive functions