Siemens SINAMICS S120 Function Manual page 11

• As part of routine tests, SINAMICS devices with AC motors undergo a voltage test in
• Motors should be connected-up according to the circuit diagram provided. otherwise
Note
When operated in proper condition and in dry operating areas, SINAMICS devices with
three-phase motors conform to Low-Voltage Directive 73/23/EEC.
Drive functions
Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5
CAUTION
accordance with EN 50178. Before the voltage test is performed on the electrical
equipment of industrial machines to EN 60204-1, Section 19.4, all connectors of
SINAMICS equipment must be disconnected/unplugged to prevent the equipment from
being damaged.
they can be destroyed.
Foreword
11