Working With Bluetooth - Leica FlexLine TS02 User Manual

10.5
Description
Establishing a
connection
step-by-step
Data Management
5. Press YES to format the USB memory stick.
A message will display once the formatting of the USB memory stick is completed.
Press OK to return to the USB-File Manager screen.

Working with Bluetooth

Instruments fitted with a Communication side cover can communicate with external
devices via a Bluetooth connection. The instrument Bluetooth is a slave only. The
Bluetooth of the external device will be the master, and therefore will control the
connection and any data transfer.
1. On the instrument ensure that the communication parameters are set to
Bluetooth and Active. Refer to "4.3 Communication Parameters".
2. Activate Bluetooth on the external device. The steps required depend on the
Bluetooth driver and other device specific configurations. Refer to the device
user manual for information on how to configure and search for a Bluetooth
connection.
The instrument will appear on the external device as "TS0x_y_zzzzzzz", where x =
the FlexLine series (TS02, TS06 or TS09), y = the angular accuracy in arc seconds,
and z = the serial number of the instrument. For example, TS02_3_1234567.
3. Some devices ask for the identification number of the Bluetooth. The default
number for a FlexLine Bluetooth is 0000. This can be changed by:
a. Select Settings from the MAIN MENU.
b. Select Comm from the SETTINGS MENU.
c. Press BT-PIN from the COMMUNICATION PARAMETER screen.
FlexLine, 233