Thank you for purchasing the CC-Link IE Field Network remote IO-Link module (hereafter abbreviated as IO-Link module).
This manual describes the procedures, system configuration, parameter settings, functions, and troubleshooting of the IO-
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the IO-Link module to handle the product correctly.
When applying the program examples provided in this manual to an actual system, ensure the applicability and confirm that it
will not cause system control problems.
Please make sure that the end users read this manual.
Unless otherwise specified, this manual provides program examples in which the remote I/O signals and the
remote register of an IO-Link module are assigned as follows.
• Remote input signal: RX0 to RX2F
• Remote output signal: RY0 to RY2F
• Remote register: RWr0 to RWr83, RWw0 to RWw83
For the assignment of remote I/O signals and remote registers, refer to the following.
User's manual for the master/local module used
The RJ71GF11-T2 is used as the master/local module in this manual.