Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 191

Device validation New IO-Link
setting device
Identity validation Compatible
Incompatible
IO-Link device parameter used after
replacement
When IO-Link device parameters are downloaded from the
non-volatile memory of the IO-Link module
When IO-Link device parameters are uploaded from the
new IO-Link device
When IO-Link device parameters are newly set
When IO-Link device parameters are downloaded from the
non-volatile memory of the IO-Link module
When IO-Link device parameters are uploaded from the
new IO-Link device
When IO-Link device parameters are newly set
Replacement procedure
Set "Device Validation Setting" to "1.
Compatibility Validation (vendor information and
model name)".


Perform all procedures.
Cannot be used.

Perform all procedures.
Appendix 4 IO-Link Device Replacement Procedure
A
APPX
189