Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 182

Event data
■Remote buffer memory address
Address
2C00H to 2C04H
■Description
The following shows the content stored in Event data (address: 2C00H to 2C04H).
Address b15
2C00H Event
2C01H
2C02H Event code details 1
2C03H Event code details 2
2C04H Event code details 3
■Reading of event data
Event data is read by turning off and on Event read request flag (address: 2D09H).
Event history clear command
■Remote buffer memory address
Address
2D00H
■Description
The event history stored in the IO-Link module is cleared.
b15 b14 b13
0 (fixed)
(1) ON: Commanded, OFF: Not commanded
■Operation of Event history clear
The following occurs when Event history clear command (address: 2D00H) is set to Commanded (ON).
• Event data (address: 2C00H to 2C04H) is cleared.
• Event status flag (RX1D) turns off.
Event history clear command
(address: 2D00H)
Event history
Event history clear completion
(address: 2D01H)
(1) Periodically read and check the event history using the REMFR instruction.
(2) Event history clear processing
Current error data 1 to 16 (address: 2B00H to 2BFFH) are not cleared. To clear Current error data 1 to 16
(address: 2B00H to 2BFFH), turn on Error clear request flag (RWw0.b0). ( Page 159 Error clear request
flag (RWw0.b10))
APPX
180
Appendix 3 Remote Buffer Memory
b14 b13 b12 b11
b12 b11 b10
Controlled by the program
Controlled by the IO-Link module
OFF
(1)
OFF
Name
Event data
b10 b9 b8 b7
Name
Event history clear command
b9 b8 b7 b6
ON
(2)
b6 b5 b4 b3
b5 b4 b3 b2
(1)
ON
b2 b1 b0
b1 b0
(1)