Manual uploading
Parameters can be uploaded manually using "Manual upload" of "Command Execution of Slave Station" of the engineering
tool.
Operating procedure
1.
Open the "CC IE Field Configuration" window.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
2.
Open the "Command Execution of Slave Station" window.
From the list of stations, select an IO-Link module [CC IE Field Configuration] [Online] [Command Execution of
Slave Station].
3.
Set "Method selection" to "Manual upload", select the target channel in "Write Value", and click the [Execute] button.
When "0: All Channels" is selected in "Write Value", all channels are turned on simultaneously.
7 FUNCTIONS
7.1 IO-Link Master Functions
7
69