Event history clear completed
■Remote buffer memory address
Address
2D01H
■Description
The clear completion status of the event history stored in the IO-Link module is shown.
Stored value
0H
1H
■Operation of Event history clear
When the event history clear is completed, Event history clear completed (address: 2D01H) is turned to Completed (1).
For the timing of Not completed (0) Completed (1) Not completed (0), refer to the following.
Page 180 Event history clear command
Operating condition setting request flag
■Remote buffer memory address
Address
2D07H
■Description
This flag is used for reflecting parameters after writing parameter data to the remote buffer memory.
b15
b14
b13
b12
0 (fixed)
(1) ON: Request, OFF: Not performed
b11
b10
b9
b8
Name
Event history clear completed
Event history clear completed
Not completed
Completed
Name
Operating condition setting request flag
b7
b6
b5
b4
Appendix 3 Remote Buffer Memory
b3
b2
b1
b0
(1)
APPX
181
A