Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 111

Setting parameters
Connect an engineering tool to the CPU module and set parameters.
1.
Configure the CPU module in the following way.
[Project]  [New]
2.
Click [OK] button on the following window to add a module label of the CPU module.
3.
Configure the CC-Link IE Field Network master/local module in the following way.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
9.2 Example of Program to Communicate with an IO-Link Device
9 PROGRAMMING
109
9