Swap Function - Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual

Swap function

This function swaps the upper and lower bytes of data sent and received between the IO-Link module and the IO-Link device
connected to each channel.
With this function, there is no need to program an operation to swap the upper and lower bytes when using an IO-Link device
that handles the upper and lower bytes in reverse.
Ex.
When the swap function is enabled
byte0
b7 b6 b5 b4 b3 b2 b1 b0
Parameter
(3)
(4)
7 FUNCTIONS
76
7.1 IO-Link Master Functions
byte1
b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0
Measured value Measured value
MSB
...
b15
Parameter Measured value Measured value
...
b15
Measured value Measured value
LSB
byte2
(1)
LSB
b0
MSB
(2)
b0
(1) Structure of IO-Link device input process data
(2) CPU module device
(3) Input process data (1st word)
(4) Input process data (2nd word)