Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 103

Device replacement start procedure
Operating procedure
1.
Open the "CC IE Field Configuration" window.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Network
Configuration Settings]
2.
Open the "Command Execution of Slave Station" window.
From the list of stations, select an IO-Link module  [CC IE Field Configuration]  [Online]  [Command Execution of
Slave Station].
3.
Set "Method selection" to "Start Device Changeout", specify the target channel in "Write Value", and click the [Execute]
button. When "0: All Channels" is selected in "Write Value", the device replacement status of all channels turns on
simultaneously.
7 FUNCTIONS
7.8 Device Replacement Function
7
101