Function List - Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual

Function list

This section lists the functions of IO-Link modules.
IO-Link master functions
Item
IO-Link cyclic transmission function
IO-Link transient communication function
IO-Link device setting automatic upload/
download function
IO-Link device validation function
Disconnection detection function
Input data masking function
Swap function
Bit segment function
IO-Link communication retry count integration
function
Input function
Item
Input OFF delay function
Input response time setting function
Output function
Item
Number of output ON times integration function
Output ON/OFF information hold function
2 SPECIFICATIONS
20
2.2 Performance Specifications
Description
Communicates process data periodically with the IO-Link device
connected to each channel.
Reads/writes parameters at any timing from/to the IO-Link device
connected to each channel.
Saves the parameters of the IO-Link device connected to each channel
in the IO-Link module, and as necessary, overwrites the parameters of
the IO-Link devices.
Validates compatibility and identity of the IO-Link device connected to
each channel.
Detects disconnection if communication with an IO-Link device is lost in
IO-Link mode.
Calculates ON/OFF values in IO-Link (standard) mode according to the
input process data.
Swaps the upper and lower bytes of data sent and received between
the IO-Link module and the IO-Link device connected to each channel.
Segments input process data using the bit count set for each channel.
Counts the number of IO-Link communication retries for each channel
Description
This function turns off an X signal after a predetermined time passed
from when an actual input becomes off from on.
This function prevents an incorrect input due to noise by setting the
response time until the module recognizes an actual input as the X
signal.
Description
The number of ON times of each output point is counted within the
range of 0 to 2147483647.
This function checks if the output has been turned once on or off.
Reference
Page 64 IO-Link cyclic
transmission function
Page 66 IO-Link transient
communication function
Page 67 IO-Link device setting
automatic upload/download
function
Page 70 IO-Link device validation
function
Page 73 Disconnection detection
function
Page 74 Input data masking
function
Page 76 Swap function
Page 78 Bit segment function
Page 81 IO-Link communication
retry count integration function
Reference
Page 83 Input OFF delay function
Page 85 Input response time
setting function
Reference
Page 87 Number of output ON
times integration function
Page 88 Output ON/OFF
information hold function