Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 170

Operation mode setting
■Remote buffer memory address
Address
1700H
1800H
1900H
1A00H
1B00H
1C00H
1D00H
1E00H
■Description
The following shows which operation modes are supported by connected external devices.
External device
SIO device
IO-Link device that can perform IO-Link communication and digital input
simultaneously
Other IO-Link device
Set the operation mode of each channel.
Setting value
0H (default value)
1H
2H
4H
7H
8H
■Enabling the setting
Turn on and off Operating condition setting request flag (address: 2D07H) to enable the setting.
APPX
168
Appendix 3 Remote Buffer Memory
Name
CH1 Operation mode setting
CH2 Operation mode setting
CH3 Operation mode setting
CH4 Operation mode setting
CH5 Operation mode setting
CH6 Operation mode setting
CH7 Operation mode setting
CH8 Operation mode setting
Operation mode
• SIO (sink input) mode
• SIO (source output) mode
IO-Link (sink input) mode
IO-Link (standard) mode
Operation mode
Disabled mode
IO-Link (standard) mode
IO-Link (sink input) mode
SIO (sink input) mode
SIO (source output) mode
Power supply mode