Procedure For Setting The Io-Link Device Parameter - Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual

Procedure for setting the IO-Link device parameter

The following describes how to set the IO-Link device parameter.
Setting procedure
1.
Make the online connection between the personal computer and the IO-link device.
FDC project tree  Right-click on the Device DTM node of the control target  [Go Online]
2.
Configure the parameter setting of the IO-Link device. Right-click on the Device DTM node of the control target, and
select [Configuration] in the context menu displayed by right-clicking to start the Device DTM setting window.
3.
Read the parameter setting of the IO-Link device. Click the icon to read parameters of the connected IO-Link device in
the parameter field of the Device DTM settings window.
4.
Set the items to be changed. For setting details of Device DTM, refer to the manual supplied from the manufacturer.
5.
Write the set parameters to the IO-Link device. Click the icon to write the Device DTM setting to the connected IO-Link
device.
6 PARAMETER SETTING
6.4 IO-Link Device Parameter Setting
6
63