Download  Print this page

Checking For The Error Codes And The Warning Codes - Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual

Cc-link ie field network remote io-link module.
Hide thumbs

Advertisement

11.5
Checking for the Error Codes and the Warning
Codes
Error codes can be checked by any of the following methods:
Page 129 Checking by executing a command of the slave station
Page 131 Checking by Error code (RWr1)
Warning codes can be checked by any of the following methods:
Page 129 Checking by executing a command of the slave station
Page 131 Checking by Warning code (RWr2)
Reading of error history from CC-Link IE Field Network diagnostics is not supported.
An error message is displayed if "Error History" is selected from CC-Link IE Field Network diagnostics.
Checking by executing a command of the slave station
This section describes how to check the errors by executing a command of the slave station.
Operating procedure
1.
Select the IO-Link module in List of stations in the "CC IE Field Configuration" window.
2.
Open the "Command Execution of Slave Station" window.
[CC IE Field Configuration]  [Online]  [Command Execution of Slave Station]

11.5 Checking for the Error Codes and the Warning Codes

11 TROUBLESHOOTING
129
11

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric NZ2GF2S-60IOLD8

Comments to this Manuals

Symbols: 0
Latest comments: