Download  Print this page

Example Of Program To Communicate With Sio Device - Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual

Cc-link ie field network remote io-link module.
Hide thumbs

Advertisement

9.3
Example of Program to Communicate with SIO
Device
The following describes an example of a program to communicate with an SIO device.
System configuration example
■System configuration
(1)
(2)
(1) Master station (network No.1, station No.0)
• Power supply module: R61P
• CPU module: R04CPU
• CC-Link IE Field Network master/local module: RJ71GF11-T2 (Start I/O number: 0000H to 001FH)
• Input module: RX40C7 (start I/O number: 0020H to 002FH)
• Output module: RY40NT5P (start I/O number: 0030H to 003FH)
(2) Slave station (network No.1, station No.1)
• IO-Link module: NZ2GF2S-60IOLD8
(3) SIO device (CH1: switch, CH8: lamp)
■Assignment of link devices
The assignment of link devices is the same as the example of the program to communicate with an IO-Link device. (
Page 107 Assignment of link devices)
(3)

9.3 Example of Program to Communicate with SIO Device

9 PROGRAMMING
115
9

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric NZ2GF2S-60IOLD8

Comments to this Manuals

Symbols: 0
Latest comments: