8.
Set "Method selection" to "Write Parameters".
9.
Set "Write Value". The following are the procedure.
• Click the title cell of "Initial Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values according to Initial setting description. ( Page 108 Initial setting
description)
10.
Click the [Execute Parameter Processing] button to write the parameter to the IO-Link module.
11.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration] [Close with Reflecting the Setting]
12.
Display the refresh parameter setting window and configure the setting as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Setting]
9.2 Example of Program to Communicate with an IO-Link Device
9 PROGRAMMING
111
9