Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 54

Changing the parameter without changing the network configuration
To change only the created module parameter of the slave station without changing the network configuration, set the
parameter in the following procedure.
Operating procedure
1.
Open the "CC IE Field Configuration" window.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Network
Configuration Settings]
2.
Open the "Parameter Processing of Slave Station" window.
From the list of stations, select an IO-Link module  [CC IE Field Configuration]  [Online]  [Parameter Processing of
Slave Station].
3.
Set "Method selection" to "Read Parameters".
4.
Click the [Execute Parameter Processing] button, and the following window is displayed.
5.
Click the [Yes] button.
6.
The parameters are read from the IO-Link module.
6 PARAMETER SETTING
52
6.3 Changing the IO-Link Module Parameters