Mitsubishi Electric NZ2GF2S-60IOLD8 User Manual page 187

Number of output ON times integration value clear completed
■Remote buffer memory address
Address
2E81H
■Description
The clear completion status of CH Number of output ON times integration value (address: 299EH to 29ADH) is shown.
b15 b14 b13 b12
0 (fixed)
CH ON: Completed, OFF: Not completed
■Operation of Number of output ON times integration value clear
Once clearing of the number of output ON times integration value is completed, the bit of the corresponding channel of
Number of output ON times integration value clear completed (address: 2E81H) will be Completed (1).
For the timing of turning the bit from Not completed (0)  Completed (1)  Not completed (0), refer to the following.
Page 184 Number of output ON times integration value clear command
Device replacement flag
■Remote buffer memory address
Address
36CCH
■Description
Set this flag to perform device replacement with the IO-Link module being powered on.
When this flag is turned off and on, the corresponding Device replacement status (address: 299DH) turns on.
Replace the device when Device replacement status (address: 299DH) is on. Turn off this flag after replacement.
The following occurs when this flag is on.
• Input to and output from IO-Link devices is disabled in the IO-Link mode.
• Input to and output from SIO devices is turned off in the SIO mode.
When this flag is turned on and off, the corresponding Device replacement status (address: 299DH) turns off.
b15 b14 b13 b12
0 (fixed)
CH ON: Replace, OFF: Not performed
b11 b10 b9 b8
b11 b10 b9 b8
Name
Number of output ON times integration value clear completed
b7 b6 b5 b4
CH8 CH7 CH6 CH5
Name
Device replacement flag
b7 b6 b5 b4
CH8 CH7 CH6 CH5
Appendix 3 Remote Buffer Memory
b3 b2 b1 b0
CH4 CH3 CH2 CH1
b3 b2 b1 b0
CH4 CH3 CH2 CH1
APPX
185
A