Obtaining The Ip Address For The Imm - IBM System x3850 X6 Installation And Service Manual

4. Add "FF" and "FE" in the middle of the 12 characters (for example, 5C F3 FC FF
5. Convert the first pair of hexadecimal characters to binary (for example, 5=0101,
6. Flip the 7th binary character from left (0 to 1 or 1 to 0), which results in
7. Convert the binary back to hexadecimal (for example, 5E F3FCFFFE5EAAD0).

Obtaining the IP address for the IMM

This topic provides instructions on how to obtain the IP address for the IMM.
About this task
To access the web interface to use the remote presence feature, you need the IP
address or host name of the IMM. You can obtain the IMM IP address through the
Setup utility and you can obtain the IMM host name from the IMM network access
tag. The server comes with a default IP address for the IMM of 192.168.70.125. To
obtain the IP address, complete the following steps:
Note: You can also obtain the IMM host name, MAC address, and IP address from
the LCD display panel. See "LCD system information display panel" on page 28
for more information.
Procedure
1. Turn on the server.
2. When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed
3. From the Setup utility main menu, select System Settings.
4. On the next screen, select Integrated Management Module.
5. On the next screen, select Network Configuration.
6. Find the IP address and write it down.
7. Exit from the Setup utility.
140
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
FE 5E AA D0).
C=1100, which results in 01011100 F3 FC FF FE 5E AA D0).
01011110 F3 FF FE 5E AA D0.
Note: Approximately 10 seconds after the server is connected to ac power, the
power-on button becomes active.
on the screen for only a few seconds. You must press F1 quickly.) If you have
set both a power-on password and an administrator password, you must type
the administrator password to access the full Setup utility menu.