Printer Function Error - Toshiba e-Studio3511 Service Handbook

Message displayed in the TopAccess
Error code
3C70 Power Failure has been occurred in
Email receiving.
3D10 SMTP Destination Error has been
detected in the received mail. This mail
was deleted.
3D20 Offramp Destination limitation Error has
been detected in the received mail.
3D30 Fax Board Error has been occurred in
the received mail.
3E10 POP3 Connection Error has been
occurred in the received mail.
3E20 POP3 Connection Timeout Error has
been occurred in the received mail.
3E30 POP3 Login Error has been occurred in
the received mail.
3F00 File I/O Error has been occurred in this
3F10 mail. The mail could not be received until
3F20 File I/O is recovered.
3F30
3F40

2.1.4 Printer function error

Following codes are displayed at the end of the user name on the print job log screen.
Error code
402F Page memory size error - 1200 dpi network print is performed by the equipment
with 128 MB (standard) memory.
4031 HDD full during print - Large quantity image data by private print or invalid network
print are saved in HDD.
4032 Private-print-only error: Jobs other than Private print jobs cannot be performed.
A221 Print job cancellation - Print job (copy, list print, network print) is deleted from the
print job screen.
A222 Print job power failure - The power of the equipment is turned OFF during print job
(copy, list print, network print).
November 2003 © TOSHIBA TEC
screen
Power failure error
Destination address error
Offramp destination limitation error
FAX board error
POP3 server connection error
POP3 server connection time-out error
POP3 login error
File I/O error
Contents
2 - 19
05/05
Contents
e-STUDIO3511/4511 ERROR CODE AND SELF-DIAGNOSTIC MODE
Trouble-
shooting
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Trouble-
shooting
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)
Ch. 5.1.21 (6)