Service and Maintenance
Cleaning Procedure / Disassembly ........................................... 5-2
Reassembly .......................................................................... 5-3
Ignition Electrode and Flame Rod ............................................ 5-3
Troubleshooting ..................................................................... 5-3
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause
improper and dangerous operation.Failure to
do so may result in equipment failure.
Verify proper operation after servicing.
Failure to do so may result in equipment
failure.
Section 5
Caution
!
Caution
!
Milwaukee, Wisconsin
www.cleaver-brooks.com