Use The Oracle Ilom Cli For Immediate Shutdown - Oracle X6-2 Service Manual

Use the Power Button for Immediate Shutdown
Use the Power Button for Immediate Shutdown
Caution -
procedure to power down the server after attempting the graceful power down procedure.
1. Press and hold the Power button for four seconds to force the main power off
and to enter standby power mode.
When main power is off, the Power/OK LED on the front panel will begin flashing,
indicating that the server is in standby power mode. See
Indicators" on page
Disconnect the power and data cables from the server.
2.
See "Disconnect Cables From the Server" on page
Caution -
directed to the service processor remote management subsystem and power supply fans. To
completely power off the server, you must disconnect the power cords from the power supplies.
Related Information
Table 1
■
"Power Down Server Gracefully Using the Oracle ILOM CLI" on page 51
■
"Power Down Server Gracefully Using the Oracle ILOM Web Interface" on page 52
■
"Power Down Server Gracefully Using the Power Button" on page 53
■
"Use the Oracle ILOM CLI for Immediate Shutdown" on page 54
■
"Use the Oracle ILOM Web Interface for Immediate Shutdown" on page 55
■
"Power On the Server" on page 194
■

Use the Oracle ILOM CLI for Immediate Shutdown

Caution -
procedure to power down the server after attempting the graceful power down procedure.
1. Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
account.
Oracle ILOM displays the default command prompt (->), indicating that you have successfully
logged in to Oracle ILOM.
2. From the CLI prompt, type the following command:
->
stop -f /System
54 Oracle Server X6-2 Service Manual • June 2016
An immediate power down might corrupt system data, therefore, only use this
29.
When you press the Power button to enter standby power mode, power is still
An immediate power down might corrupt system data, therefore, only use this
"Server System-Level Status
56.