Route Redistribution Commands - D-Link DES-3326S Command Line Interface Reference Manual

The route redistribution commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create route redistribute dst ospf
create route redistribute dst rip
config route redistribute dst ospf
config route redistribute dst rip
delete route redistribute
show route redistribute
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
R R
OUTE
Parameters
src [static|rip|local]
mettype [1|2]
metric <value>
src [static|ospf{all|internal|external|
type_1|type_2}
metic <value>
src [static|rip|local]
mettype [1|2]
metric <value>
src [static|ospf {all |internal|external|type_1|type_2}] {metric
<value>}
dst [rip|ospf]
src [local|static|ospf]
dst [rip|ospf]
src [rip|static|local|ospf]
EDISTRIBUTION
224
27
C
OMMANDS