D-Link DES-3326S Command Line Interface Reference Manual page 246

disable bootp_relay
Purpose Used to disable the BOOTP relay function on the
Switch.
Syntax
disable bootp_relay
Description This command, in combination with the enable
bootp_relay command above, is used to enable
and disable the BOOTP relay function on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To disable the BOOTP relay function:
DES-3326S:4#disable bootp_relay
Command: disable bootp_relay
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
240